Shedrow_Barns

12' x 36', 3 stall, overhang, partially enclosed front, feeders under overhang.

12' x 36', 2 stalls, hay room, 5' overhang, wire stall fronts, feeders mounted in hay room.

12' x 36', 2 stalls, tack room, overhang, runs out the front.

Custom, partially sheeted wire stalls, wire to 8' custom height, skylights.

24' x 60', 4' overhang, unsheeted wire front, open gables.

24' wide custom, fully enclosed, feed doors, sliding "breezeway" style doors into storage area.

2 stall with overhang, 2 tack rooms, with custom windows in personnel doors.

12' x 12', overhang, open gables.

Custom interior with posts and header replacing divider walls.

24' x 36', roof-only, (3) 12'x24' stalls with overhang.

12' deep with 5' overhang.

12' x 48', custom 24' wide stalls, overhang with enclosed sides, wire stall fronts with feeders.

24' x 48' Custom with fully enclosed sides and gables, wire-lined walls with 4 rail runs.

12' x 48', 3 stalls with partially enclosed fronts, 12'x12' open front storage area, overhang.

Roof-only, fully covered 12'x24' wire stalls.

SHEDROW BARNS

These barns generally have a gabled roof overhang in front of the stalls.   Many sizes and options are available.

The structure can be engineered at the time of order for permits using most building codes in California, and we are a City of LA type 1 lws fabricator, which satisfies many area's welding requirements for plan check. Site, soil, foundation, etc are also important parts of the permit process, so please feel free to contact us to discuss permits in more detail.

Overhangs are generally supported by 2 3/8" full weight (sch 40) pipe posts, and are available in a variety of sizes. 6' and 12' are most common. We can also extend the walls to cover part of the overhang for additional windbreak. The corral runs are usually behind the building, with 6' wide back stall doors opening into the runs. However, the corrals can also extend out from underneath the overhang.

Color sheeting, hay rooms, feeders mounted outside the stalls, and tack rooms are the most common options. The stall fronts under the overhang are often sheeted for additional windbreak. Other options include larger foaling stalls, open storage areas, skylights, gutter, etc.

Most stall walls have a 2" x 4" stud wire wall lining to prevent horses from kicking the sheeting from inside the stalls. The wire is common on dividers and on the stall fronts also to prevent casting. Depending on the temperament of your horses, wire can be added to exterior panels or eliminated for a typical 4 or 5 rail spacing.

Installation is available in our normal service area. As with all construction, site preparation is very important. A flat and level site is critical to a safe and functional end product.

All walls are constructed of 1 7/8" galvanized pipe, with our 1 5/8" engineered sleeve connections to roof purlins and concrete. This allows the building to be relocated in the future.

Concrete footings are generally drilled and placed below grade. We can also provide a plan for a continuous footing under the walls or a slab for a storage area.

Installation can be done by our crew, or we can provide a kit with installation instructions for do-it-yourselfers and contractors.

These buildings are made to order in our shop, so custom requests are welcome. Please let us know if you have any questions.

NOTE: BUILDING DIMENSIONS GENERALLY DO NOT INCLUDE OVERHANG. OVERHANGS ARE DIMENSIONED SEPARATELY UNLESS ENCLOSED.

12' x 36', 3 stalls, partially enclosed fronts with feeders.

12' x 60', 4 stalls with unsheeted fronts and feeders, tack room, custom unsheeted perimeter wall around overhang.

3 stall with custom storage and feed area.

12' deep with 6' overhang, stalls and storage area, closed gables.

24' x 36' custom pasture shelter, with sheeted 36' divider.

24' x 36' custom, gutter.

12' x 18' with overhang.

Custom with 12' overhang with one side sheeted.

12' x 12', 4 rail interior with 3' overhang.



12' x 72' with feeders in backwall, partially sheeted under overhang, galvanized sides.

12' x 12', wire-lined stall, 6' overhang, closed gables.

12' x 24', open stall, hay room, 12' overhang.

Tack room door.

12' x 24' with overhang.

24' custom depth, open gables, overhang.

Partially enclosed overhang.

2 stall enclosures with partially enclosed front walls and feeders.

12' x 60', 4 stalls, tack room, stall fronts partially enclosed with feeders, overhang.

Interior, custom ventilation at top of backwall, closed gables, wire-lined sheeted walls, 4 rail front with slot for exterior mounted feeder.

Custom with enclosed storage area.

Partially enclosed fronts, hay room, overhang.

12' x 24', with open front stall, hay room, overhang, closed gables.

Custom 12' deep with 5' overhang, wire runs/dividers/sheeted walls.

Custom 2 stall with 5' overhang, un-sheeted front, with runs.

Hay room between stalls with feeders mounted in hayroom.