Bullpen attached to holding pens and arena.
4' plywood, custom latch.
These are generally round breaking pens with solid sides. The siding is
normally plywood (our only wood product). These are also available as
frames-only, and you can paint and install the wood yourself. Individual
panels are usually 8' long.
The plywood is attached with a high-quality torx screw, that is resistant to
shearing-off. The plywood is available in any color you choose, and is
typically painted twice over a primer coat.
Any diameter is available, but larger (100'+) diameters may require additional
concreted posts or 16' panels. Typically, there is an 8' gate with concreted posts on
both sides, with the rest of the pen self-supporting without concrete due to the
round shape. Usually they are built with latches that can be operated from
Site preparation is very important, more so than most arenas. The
site must be very flat to be properly installed.
Sand plates are a standard option to strengthen the connection between the bottom
joints, to prevent spreading at the base.
We have several styles available, with 4', 6', and 8' tall 3/4" ACX plywood, and have
done other custom sizes. Generally, there is a grab rail above the