BREEZEWAY BARNS AND MARE MOTELS
There are many options available, and it is common to have hay and tack rooms
inside. The roof line is generally a symmetrical gable, but a raised
(stepped) roof can be included. The step can be
closed or open for ventilation.
Swinging doors to the exterior corrals are available, as well as sliding
breezeway doors. Feeders (mounted in or outside the stalls),
skylights, and wire panels are also common options.
They are available as roof-only, partially enclosed, or fully enclosed with
breezeway doors.
We do not provide solid divider walls between horses. We weld stud wire up
to 6' high to 4 horizontal 1 7/8" pipes. The welds are smooth and clean.
Inside perimeter walls also have stud wire, as well as the gates. 4, 5, or
6 rail walls without wire are also available at a lower cost. Storage rooms do
not include wire, so let us know if you might someday turn storage areas into
stalls.
We use a heavy-duty cee and zee purlin roof system, and 26 gauge (never the
thinner 29 gauge) roof sheeting.
We can provide engineering for the 2001 CBC and 2002 LACO Building Codes (and
most other local California codes and updates) with little or no changes to
standard designs, and can accommodate most custom requests with engineering as
well.
Grading, concrete, site, etc are important parts of the permit process, so
please feel free to contact us for more information, and we also recommend
contacting your local building department. We are a
licensed City of Los Angeles type I lws fabricator, which satisfies many
building departments' welding requirements. We build regularly in 20 and
30 lb/psf roof snow load areas, but can also engineer for 40 lb/psf if your
location requires a heavier load.
Stalls are usually 12'x12' (plus any exterior runs). Other sizes
are available. 15' and 18' are common for foaling stalls. Breezeways are also usually
12'. Hay and tack rooms are available, as well as porches which make a nice
grooming area.
Installation can be done by our crew, or we can provide a
kit with installation instructions for do-it-yourselfers and contractors.
The exterior is available in a variety of colors. We prefabricate the wall
frames in our own shop, so custom inquiries are welcome.
36' x 48', 4 stall, with eave extension.
36' x 36', 6 stalls with raised breezeway roof, 12'x24' 4 rail runs.
Raised Breezeway.
Feeders in breezeway, raised Breezeway.
36' x 60', 10 stall Endwalls enclosed
36' x 24', 4 stall, closed raised breezeway, skylights
Interior with custom (8'8") height headers
36' x 24', 4 stall, 5 rail with 12'x12' exterior runs
(with gates).
36' x 24', 4 stall, doors to pasture (no runs).
Standard Gable, Breezeway Doors, feeders mounted in breezeway.
Raised Breezeway
Standard Gable with breezeway doors, without runs.
36' x 24', 4 stall, Standard gable, without runs
Eave line, 18' of 24' stalls are covered
4 Rail interior with feeders, roof-only
60' x 24' Roof-only, 12'x24' covered stalls, extra purlin line for snow load.
36' x 32', custom 12' x 16' foaling stalls, sliding stall doors, runs with
heavy-duty divider
36' x 24', 4 rail with wire dividers, roof-only, feeders.
36' x 36', 6 stall, Endwalls enclosed, sidewalls open to runs.
Interior with open raised breezeway, wire panels
4 Stall raised breezeway
36' x 24', 4 Stalls, color sides, galvanized roof
with skylights, 24'x24' half wire exterior corral.
Roof only with 18' of stalls covered (48' wide roof).
Roof-only with wire walls and 4 rail exterior run.
36' x 72', 12 stall, 12'x24' 4 rail exterior runs. 40 lb/psf snow load.
36' x 24', 4 stall, no exterior runs, hitching rails and cross ties, standard
gable roof.
36' wide with 12' exterior runs, 5 rail with some 6' wire stud areas.
36' x 12' porch (endwall roof extension on 4 stall barn.
Storage area, posts and headers to eliminate interior walls, underside of color
sheeting is always white as shown.
Endwall stall doors with exterior wire panel to protect sheeting, closed raised
breezeway, breezeway doors.
Storage rooms across from horse stalls
Interior with 6' wire (5' at gates), feeders, and skylights. Built on
sloped pad, proper grading is important or fill is required after installation.
Closed raised breezeway
Roof only with custom endwall runs with shaders.
